Water Spot Remover (500ml)

When water evaporates off your vehicle it often leaves minerals behind. These minerals are what you see as water spots. If left, they can etch or erode into the underlying surface, such as the clearcoat.

Autostolz™ Water Spot Remover is very effective at quickly and easily removing surface water spots before they etch into a surface. The acidic water‑based product that dissolves and lifts most surface minerals, so that you can wipe them from the surface easily.

Note: Autostolz™ Water Spot Remover will not remove etching. If the etching is in the clearcoat then machine polishing will be required.

If the water spots have not etched, then Autostolz™ Water Spot Remover is the quickest and easiest solution.

DIRECTIONS

Work in a small area at a time. Wash and dry the vehicle first. Shake bottle well. Apply with an applicator and either let sit or agitate with the applicator for no more than 30 seconds. Wipe residue off with a clean, soft microfiber cloth. Reclean the area using a quick detailer or water to neutralize any remaining acidic water spot remover. Repeat as necessary.

Use on cool surfaces only out of direct sunlight. Surface should not exceed 30⁰C (86⁰F).

Do not use on aluminium.

This is an acidic product, wear gloves, take precautions, avoid contact with skin or eyes, do not let dwell for more than 30 seconds. Longer dwell time may damage surfaces such as glass.

Take care on exterior tints and mirrors with thin coatings.

With all chemicals always do a small, subtle test spot first. Do not let freeze.

Autostolz Manufacture this product in USA.